Features

• 1/4" Whitworth screw
• Two locking nuts
• Hot shoe base

This tool screws onto the bottom of all LCD monitors / 2.4GHz transmitters which have a 1/4" Whitworth threaded nut built in.

The monitor / TX can then be mounted onto the "hot shoe" ("bayonet") fitting found on most camcorders.

This "hot shoe" on a camcorder is used primarily for mounting lights but can equally be used for mounting an LCD monitor or a 2.4GHz transmitter.

The OZA3000 is slid into the slot and then the LCD is twisted onto the 1/4" screw until it is at the correct hight. Then the two locking nuts are rotated upwards locking the LCD monitor firmly in place.

If a camera has a 1/4" Whitworth threaded hole on the carrying handle instead of a hot shoe slot then the required mounting tool is the OZA3010 1/4" screw mounting tool instead.

• 1 x OZA3000data sheet

• For use with - LCD monitors & 2.4GHz TX with 1/4" Whitworth threaded unit
• Material - cast aluminium
• Dimensions - Screw: 30mm x 1/4", base: 22x22mm
• Weight - 25g
• Features - 20mm 1/4" Whitworth screw on a hot shoe base, 2 locking nuts